Considerações Saber Sobre swimming pool renovation
Considerações Saber Sobre swimming pool renovation
Blog Article
There comes a point in every pool’s lifetime when repairs and remodeling can no longer be put off.
You can either dispose of the drained pool water or recirculate it back into your pool once the plastering is complete. Before refilling the pool with fresh water, test your source water for excessive minerals that may affect the water balance in your pool.
You don’t want to refill your pool only to find out later that there are problems with the water chemistry.
Never leave a plaster pool empty for more than a week, as that may dry out the plaster and cause it to crack. Leaving it empty longer than seven days may lead to delamination, tiles popping off, and spider cracks.
Quality Materials: We use high-quality materials that withstand the test of time, reducing the need for frequent repairs.
Durability: Consider how long the plaster will last considering your regions environmental factors, i.e., hot summers or harsh winters. Pebble Tec is considered to have a life span of around 25 years while white plaster lasts about eight years.
When cleaning a fiberglass pool, always ensure you use nylon bristles so that you don’t scratch the surface of the pool and use a pool vacuum that is heavy enough to remove dirt and debris that has sunk to the bottom.
In addition, other contaminants such as rust stains, algae, and scaling must also be scrubbed off using a pressure washer. After cleaning, use a muriatic acid solution to etch the pool surface to give better adhesion to the new plaster.
If you notice any cracks or sunken areas in the pool, drain out the water and add hydraulic cement grout to the affected area using a trowel.
Use the trowel to apply the second layer but this time ensure the coating is ¼-inch thick. Double-check to ensure the layer is smooth to give your pool surface a clean, professional finish.
However, although pool installation has come a long way, fiberglass pools are still subject to everyday wear and tear and require basic maintenance to ensure they stay in top condition and don’t end up devaluing your property.
The total amount you will pay to replaster your pool depends on several factors inground swimming pool repair near me including pool size, hot tub service, and more. Generally, it runs around $4-7 per square foot to replaster your pool’s concrete surface.
Trowels are then used to smooth and level the surface. Finally, the plaster is left to dry for several days before the pool can be filled with water.
Reliable Customer Service: We are committed to customer satisfaction and are always available to address any concerns or queries.